Component - WB4PD v1: Wallylights 4 Port Universal Remote Differential Board

Component Info

WB4PD v1: Wallylights 4 Port Universal Remote Differential Board 2D Component

NEW AND IMPROVED DESIGN!!!! These will work with the most popular controllers that use xlights and FPP. Differential Receiver allows for over 150 feet network RJ45 networking distance from your pixel controller. Adding 4 additional remote ports for delivering more pixels to your show further then tradition 3 wire solutions. With power indicator lights to help show if there is power going to the lights. These boards do not have data lights. Please ensure you've got the jumper on the correct voltage for your power supply. 5 / 12 volt selection 4 port pixel Differential Receiver allows up to 1600 pixels per port at 20 FPS or 800 pixels per port at 40 FPS for data. Over 40 feet between Differential Receiver to first pixel per port and doubling that distance with a f-amp in between.

Purchase Url: https://wallyslights.com/colle...

Visibility: Public

Component Design

Component Type: Automatic

Validation

Validation Status: Validated

Parts

Mounting Hardware Required: YES

Part NameQty
Male-Female Threaded Jack Screws, 5/16" Long Male Thread4
Steel Locknut with External-Tooth Lock Washer, Zinc-Plated, 4-40 Thread Size4
Zinc-Plated Steel Pan Head Phillips Screw, 4-40 Thread, 3/16" Long4
Menu Category

Component is listed in the following menu categories:

    Other Controllers
Version Changes
Version Description
v3 (minor) Changed hole size
v2 (major) moved hole
v1 (major) moved hole
Color Assignments
Color Color Action Extrude Height (mm) Wall Thickness (mm)
#FF0000 IGNORE 0 0
#000000 CUT 0 0