All in One Controller Box: F48 + Raspberry PI 3
Stackable mounting plates allow more equipment to go in the crate.
The smallest of the MTM enclosures, the MTM 30 can still be packed with a full size power supply and tons of space for components on the top shelf.
Jdeation Featured Design
Design ID : 3CBUKBCU
Designer : jchancel
Assembly instructions for - MTM 30 Double Decker
View our detailed walkthrough video for instructions on how to use the JDeation Designer
Most parts are available at home depot - all are available online.
Print your design on your home paper printer to scale.
On your design, click the download button and select PDF (Print). You must open the PDF in Adobe Reader to get the advanced print functions. Do not open the PDF in your browser. From the Adobe Reader print dialog box, select the following options.
Image of design printed to scale:
Screw Size | Drill Size | Typical uses |
---|---|---|
4/40 | 1/8" | Component standoffs |
#6 | 5/32" | Self tapping screws for mounting to enclosure |
#8 | 3/16" | 3" and 4" Bolts for P.S. and Shelves |
#10 | 7/32" | 6" Bolts for P.S. and Shelves |
NOTE: Occasionally the fabrication process will remove one or both sides. If you can see through the acrylic clearly then the film is gone.
Depending on the design, power supplies are either attached via mounting brackets, or screwed directly to the bottom plate. If your design requires the power supplies to be screwed to the bottom plate, attach them now using M3 or M4 screws.
WARNING: DO NOT OVERTIGHTEN
WARNING: DO NOT OVERTIGHTEN
Few tips:
Use our contact page if you require assistance with your build.