MTM30: Blank Plate
Keep it simple with the MTM 30 Ammo Crate Single Level Mounting Plate
Nothing fancy here, just a standard mounting plate for the MTM 30 Ammo Crate. Oh, except that you can customize it using the Jdeation Designer. Ok, thanks kinda fancy.
Jdeation Featured Design
Design ID : HA9J1WT9
Designer : Designer: jchancel
Assembly instructions for - MTM 30 Single Level
View our detailed walkthrough video for instructions on how to use the JDeation Designer
Most parts are available at home depot - all are available online.
Print your design on your home paper printer to scale.
On your design, click the download button and select PDF (Print). You must open the PDF in Adobe Reader to get the advanced print functions. Do not open the PDF in your browser. From the Adobe Reader print dialog box, select the following options.
Image of design printed to scale:
|Screw Size||Drill Size||Typical uses|
|#6||5/32"||Self tapping screws for mounting to enclosure|
|#8||3/16"||3" and 4" Bolts for P.S. and Shelves|
|#10||7/32"||6" Bolts for P.S. and Shelves|
NOTE: Occasionally the fabrication process will remove one or both sides. If you can see through the acrylic clearly then the film is gone.
Depending on the design, power supplies are either attached via mounting brackets, or screwed directly to the bottom plate. If your design requires the power supplies to be screwed to the bottom plate, attach them now using M3 or M4 screws.
WARNING: DO NOT OVERTIGHTEN
Use our contact page if you require assistance with your build.