4 Positions Dual Row 600V 25A Screw Terminal Strip Blocks with Cover + 400V 25A 4 Positions Pre-Insulated Terminals Barrier Strip Black & Red by MILAPEAK. This four terminal block is used to receive the incoming AC power and distribute power to three power supplies. I use a set of three of these: one for power, one for neutral, one for ground. If you have more or less PSUs, blocks with more or less terminals are readily available. This configuration has the jumper installed. A jumper is not required but will often be used to distribute power to multiple PSUs so space on the board for the jumper is accounted for in the design.
Purchase Url: https://www.amazon.com/dp/B07C...
Visibility: Public
Component Type: Automatic
Validation Status: Validated
Mounting Hardware Required: YES
CUSTOMComponent is listed in the following menu categories:
Version | Description |
---|---|
v21 (minor) | Final tweaking of hole position. |
v20 (minor) | Final tweaking of hole position. |
v19 (minor) | Final tweaking of hole position. |
v18 (minor) | Trying for perfection! |
v17 (minor) | Tweaking hole position. File caching seems fixed. Final tweak. |
v16 (minor) | Tweaking hole position. The printed version is not updating after changes. I think my browser is caching the PDF file. That's why there are so many position tweaks. |
v15 (minor) | Tweaking hole position. The printed version is not updating after changes. I think my browser is caching the PDF file. That's why there are so many position tweaks. |
v14 (minor) | Tweaking hole position. The printed version is not updating after changes. I think my browser is caching the PDF file. That's why there are so many position tweaks. |
v13 (minor) | Tweaking hole position. The printed version is not updating. I think my computer is caching the PDF file. That's why there are so many position tweaks. |
v12 (minor) | Tweaking hole position |
v11 (minor) | Tweaking hole size |
v10 (minor) | Tweaking hole spacing. Jason, the previous errors were mine, not the system. I entered the wrong width so the system wouldn't generate the right hole sincew it didn't have the space.. |
v9 (minor) | System not generating holes per the spec. Right hole not appearing. Playing with it. |
v8 (minor) | System not generating holes per the spec. Right hole not appearing. Playing with it. |
v7 (minor) | System not generating holes per the spec. Right hole not appearing. Playing with it. |
v6 (minor) | System not generating holes per the spec. Playing with it. |
v5 (minor) | System not generating holes per the spec. Playing with it. |
v4 (minor) | System not generating holes per the spec. Playing with it. |
v3 (minor) | System not generating holes per the spec. Playing with it. |
v2 (minor) | System not generating holes per the spec. Playing with it. |
v1 (minor) | The system is not generating the right hole though it's listed in the design so I'm adding a third hole. |
Color | Color Action | Extrude Height (mm) | Wall Thickness (mm) |
---|