Component - 5 terminal block with jumper

Component Info

5 terminal block with jumper 2D Component

5 Positions Dual Row 600V 25A Screw Terminal Strip Blocks with Cover + 400V 25A 4 Positions Pre-Insulated Terminals Barrier Strip Black & Red by MILAPEAK. This five terminal block is used to receive the incoming AC power and distribute power to four power supplies. I use a set of three of these: one for power, one for neutral, one for ground. If you have more or less PSUs, blocks with more or less terminals are readily available. This configuration has the jumper installed. A jumper is not required but will often be used to distribute power to multiple PSUs so space on the board for the jumper is accounted for in the design.

Purchase Url: https://www.amazon.com/dp/B07C...

Visibility: Public

Component Design

Component Type: Manual

Validation

Validation Status: Validated

Parts

Mounting Hardware Required: YES

CUSTOM
Part NameQty
Zinc-Plated Steel Pan Head Phillips Screw, 4-40 Thread, 3/16" Long6
Steel Locknut with External-Tooth Lock Washer, Zinc-Plated, 4-40 Thread Size6
Menu Category

Component is listed in the following menu categories:

Not Listed

Version Changes
Version Description
v3 (major) Cut holes were not #000000 black. Fixed
v2 (minor) Adding detail for clarity
v1 (minor) Aligning holes
Color Assignments
Color Color Action Extrude Height (mm) Wall Thickness (mm)