CG1500 Dual: 2 PS on Top + Blank Bottom
Designed for supportability with our easy remove power supply design
If you have ever had a power supply go out, you know the pain involved with removing the mounting plate to unscrew and replace. With this design you put your power supplies on top so they can be easily removed.
Jdeation Featured Design
Design ID : D6FBU8OM
Designer : jchancel
Assembly instructions for - CG1500 Double Decker - Full Top
View our detailed walkthrough video for instructions on how to use the JDeation Designer
Most parts are available at home depot - all are available online.
Print your design on your home paper printer to scale.
On your design, click the download button and select PDF (Print). You must open the PDF in Adobe Reader to get the advanced print functions. Do not open the PDF in your browser. From the Adobe Reader print dialog box, select the following options.
Image of design printed to scale:
Screw Size | Drill Size | Typical uses |
---|---|---|
4/40 | 1/8" | Component standoffs |
#6 | 5/32" | Self tapping screws for mounting to enclosure |
#8 | 3/16" | 3" and 4" Bolts for P.S. and Shelves |
#10 | 7/32" | 6" Bolts for P.S. and Shelves |
NOTE: Occasionally the fabrication process will remove one or both sides. If you can see through the acrylic clearly then the film is gone.
Depending on the design, power supplies are either attached via mounting brackets, or screwed directly to the bottom plate. If your design requires the power supplies to be screwed to the bottom plate, attach them now using M3 or M4 screws.
WARNING: DO NOT OVERTIGHTEN
WARNING: DO NOT OVERTIGHTEN
Few tips:
Use our contact page if you require assistance with your build.